Loading... Please wait...

Blog - aluminum gas checks

Customer Review / .44 Caliber Small Shank Aluminum Gas Checks

Posted by

A customer gave us feed back on our .44 Small Shank aluminum gas checks. These are our .018 .44 rifle gas checks made about .003 undersized inside the cup. We use a fairly thick aluminum, so these will size up to the larger bores too.


Ron Neifer:

"This is an example of the undersized checks used for Lee small shanks. Shot on two different days with my Marlin Micro purchased in early 70s. 300 grain Lee. I seat the aluminum checks with a Lee sizer and lube with my Lyman 450. I did not find one aluminum check laying on the range. I have been doing exhaustive tests and I can say these checks work as advertised. Great product. Will purchase more. They also work on regular size shanks, so go ahead and experiment.

Click Here For the .44 SS Sales Page


  • Ten rounds on left, seven rounds on right:



Ron Neifer followed up with another report on 8-7-18:

"Attached is photo of Lee 430-310-RF. As you can see your product performs as claimed. Prior to using Sage Small checks I lost 20 percent of my cast as the copper checks would not adhere solid to the base. It was frustrating as fliers would result. Those days are over. It was a perfect day at the range. I hope to try this check in my .44 mag with other projectiles. I included the load data. I have yet to find one aluminum check laying on the range."

Click Here For the .44 SS Sales Page

View Comments


New .44 aluminum gas checks for 2017

We now have two .44 caliber aluminum gas check types. One will be a new revised .44 gas check that works on most bullets with normal shank size and one that works with the average Lee aluminum mold. The gas checks for the Lee molds are made with a hard thick alloy to bite the smaller [...]

Read More »


Shipping Rate Changes

The USPS shipping rates calculator has been charging higher than needed postage lately. We have been refunding the excess postage, but it doesn't look like the USPS software will be fixed anytime soon. Its been going on for too long, so we have decided to offer 3 tiered flat rate shipping that hopefully will simplify [...]

Read More »


New Products for July

We have custom aluminum gas checks for the 8MM /.323 LEE Precision Karabiner & Maximum Molds. The 8mm/.323 gas checks are made from .012 annealed aluminum litho plate. Will slip on a .308 shank. Can size to .325, just like our 10mm and .45 plain base checks these hold very tight: Shop Now Check out [...]

Read More »




News

newsletter